Cleaner for polyester pools and slides 5lt

Powerful cleanser to remove limescale and lubrication without damaging the pool lining or gel coat

Liquid cleaning product specially designed for the elimination of limestone coatings, organic residues and mineral sediments which have long adhered to the surfaces of swimming pools (floating lines, stairs, etc.) made of polyester and fiberglass. General cleaning of empty swimming pools. Apply undiluted product to the surfaces to be cleaned, spreading the product on all the walls and the bottom. Let the product penetrate for about an hour and then rinse with plenty of water. If coverage persists, repeat operation. In areas where the problem is more intense, it is advisable to help the action of the product by rubbing the area with a brush. Apply the product with a spray gun.

The consumption of this product is 20 L. for every 100-m3 volume of the pool.

Recommendations: Before cleaning the inside of the pool, its surfaces (floor, tiles, ceramic tiles, etc.) should be thoroughly moistened with water. After cleaning with the product, the surfaces must be rinsed with plenty of water to remove any traces of product. If cleaning is done outdoors, avoid working in direct sunlight and make sure the product is not dry. When cleaning the pool for the first time, it is recommended to use the product in its insoluble form.